1. Cartridge Heaters

Manufactured in various sheathings such as Brass, Stainless Steel and Incoloy, in various diameters and lengths. Uniform heat distribution round and over the length of the heater is achieved by carefully positioning the resistance alloy in special refractory insulators. Please consult table for maximum permissible wattage.

Applications
For heating die moulds, platens, revolving rolls, plastic injection and extruding barrels, carton making machines and shoe making machines etc

2. Oil Immersion Heater
Manufactured out of special grade steel tube, brazed to a C.I. Flange provided with a thermostat pocket, earthing terminals and cap for protection of terminals.

Applications
Fuel oil heating, oil circulating, for systems that supply hot oil to plastic and chemical processes, oil jacketed kettles and similar equipment.

TYPE WATTS VOLTS DEPTH OF IMMERSION FLANGE EG2300 1000 230 438 21/2" EG203A 1500 230 438 21/2" EG230B 2000 230 438 21/2" EG230C 3000 230 438 21/2" EG230D 4000 230/440 575 21/2" EG230E 5000 230/440 575 21/2" EG230F 6000 230/440 575 21/2" EG230G 9000 230/440 575 21/2"

3. Water Heater
Manufactured out of special grade steel tube, brazed to a C.I. Flange provided with a thermostat pocket, earthing terminals and cap for protection of terminals.

Applications
Water heating, for systems that supply hot water

TYPE WATTS VOLTS DEPTH OF IMMERSION FLANGE EG230 2000 230 230 11/4" EG220 2000 230 220 11/4" EG280 3000 230 280 11/4" EG220 3000 230/440 220 11/4" EG220 3000 230/440 220 2" EG220 3000 230/440 220 2" EG260 4000 230/440 260 2" EG320 5000 230/440 320 2" EG380 6000 230/440 380 2" EG550 9000 230/440 550 2" EG575 12000 230/440 575 21/2"

4. Air Heaters
Chrome Nickel Steel Sheathed tubular heater, avilable with adjustable brackets for fitting and heavy-duty brass terminals.

Applications
Specially designed for all still air heating applications like baking, curing of paints enamels, lacquers, varnish adhesives. In dehumidifying equipment, for dryers of metal, powders, sand paper, plastic and textile industries, in hot air ducts etc.

5. Finned Air Heaters
Seamless stainless steel sheath. Post terminals Ceramic element support. Element wire situated in close proximity to outside surface for maximum heat transfer and minimum internal temperature while preserving good dielectric qualities. Magnesium oxide packing.

Applications
Specially designed for forced air heating applications, like in recirculating ovens, comfort heaters, air ducts, industrial processes requiring hot air, annealing etc.

6. Silica / Glass Cased Immersion Heaters
Manufactured from imported fused Silica/Glass tube with replaceable refractory type heaters, with a heat resistant rubber cap and a connecting connecting cable.

Applications
Highest running temperature in all acids except hydro fluoric and phosphoric acids. Also used for heating in Ferric chloride etching baths, anodizing bright dip baths etc.

7. Bobbin Type Immersion Heaters
Made from M.S./S.S./Titanium pipe welded to a C.I./S.S. Flange. The heater is the replaceable refractory type, which can be replaced easily. Can also be supplied with a lead covering.

Applications
To heat oil, water, foodstuff, alkaline solutions, anodizing and plating baths etc.

8. Cooking Range Heaters
Cooking Range Heaters consist of a set of two e heaters of 400W each and one heater of 1700W, providing a total capacity of 2500W. These heaters have a strip brazed to them to allow fitting in the cooking range.